Heating & ACS

In Refrimatiz we perform the calorific calculation for all types of surfaces, evaluating all the possible variables of the installation, such as:

 

  • Square meters of the surface to provide heat
  • Required water flow
  • Inertia storage measures necessary
  • Number of radiators (in the case)
  • Appropriate boiler

Heating & ACS

In Refrimatiz we perform the calorific calculation for all types of surfaces, evaluating all the possible variables of the installation, such as:

 

  • Square meters of the surface to provide heat
  • Required water flow
  • Inertia storage measures necessary
  • Number of radiators (in the case)
  • Appropriate boiler

Below you can see the type of Heating & ACS installations that we usually make

Below you can see the type of Heating & ACS installations that we usually make

Pre-Installation


To make a pre-installation of heating that will conduct water, we use the following materials:

Rigid Copper

Polyethylene

It’s the best material. With its tin solder, it establishes a closed circuit in the mechanical part of the installation. It is the most used material because of its low price, easy manufacture and high resistance. It’s usually used for underfloor heating.

Steel Pipe

This type of pipe is perfect for water circulation. It’s mostly used in large heating systems with high power boilers. 

 

Aerothermy

It is the most modern and used method nowadays. It consists in generating energy by combining air (70%) and electricity (30%), which translates into high savings.

Apart from a high energy efficiency, other thing that makes this system special is that just through a single aerotermoinverter, we can establish a combination of heating, sanitary hot water, solar panels and fan-coil air conditioning.

For this reason it can be said that a house with aerothermy is a modern house that thinks in comfort and energy efficiency.

Domestic & Local
The heating in these cases contains some alternatives when choosing the desired option. We can pick between the following varieties and components knowing the kind of heat that we want to reach:

 

 

Radiators

Blue Heat

The emitters or radiators are the most common installation that can be found in homes or premises, which are spread throughout the areas to be heated. Called modern radiators, they are a product whose main objective is achieve a great performance with an optimization of the electric consumption through the use of oil.

Forced Draft Solar Plates

Thermosyfon Solar Plates

En lo que a instalaciones de calefacción se refiere, puede obtener un gran ahorro en la generación de agua caliente mediante placas solares térmicas, ya sean de tiro forzado o termosifón En lo que a instalaciones de calefacción se refiere, puede obtener un gran ahorro en la generación de agua caliente mediante placas solares térmicas, ya sean de tiro forzado o termosifón

Radiating Floor

It has always been said that the feet are the thermometer of the body. Through this product, you can transmit the state of comfort of the feet to the rest of the body while you are walking through your home

 


Boilers


 

It’s the most common heat generator. Depending on the energy efficiency or the type of material consumed we can choose these different types.

 

Diesel Boiler

Gas Boiler

The diesel or gas-oil C boilers have, as their main characteristic, the use of this fuel to generate the energy necessary for heating. These devices have a tank in which the gas-oil is stored for heating. The natural gas, when it’s burned, heats and turns the water into vapor, leaving the tank with the mission of heating our homes.

Biomass Boiler

ACS Accumulator

These boilers use as a source of energy natural fuels like wooden pallets, olive bones, forest residues, nutshells, etc. to generate heat. For any heating installation it’s necessary to place one of this devices in order to always have a storage of hot water, powered by a heat generator (boiler, solar panel, stove, etc.).
Industrial

Any public centers of large dimensions, such as hospitals and hotels, usually have many services with centralized heating systems of great powers, such as:

 

Diesel Boiler

Gas Boiler

The diesel or gas-oil C boilers have, as their main characteristic, the use of this fuel to generate the energy necessary for heating. These devices have a tank in which the gas-oil is stored for heating. The natural gas, when it’s burned, heats and turns the water into vapor, leaving the tank with the mission of heating large surfaces.

Biomass Boiler 

ACS Accumulator

These boilers use as a source of energy natural fuels like wooden pallets, olive bones, forest residues, nutshells, etc. to generate heat. When we talk about central heating for large areas, we need to use one or more ACS accumulators with the capacity to store large amounts of water.

 

Pre-Installation

To make a pre-installation of heating that will conduct water, we use the following materials:

Rigid Copper

It’s the best material. With its tin solder, it establishes a closed circuit in the mechanical part of the installation.

Polyethylene

It is the most used material because of its low price, easy manufacture and high resistance. It’s usually used for underfloor heating.

Steel pipe

This type of pipe is perfect for water circulation. It’s mostly used in large heating systems with high power boilers.

 

Aerothermy

It is the most modern and used method nowadays. It consists in generating energy by combining air (70%) and electricity (30%), which translates into high savings.

Apart from a high energy efficiency, other thing that makes this system special is that just through a single aerotermoinverter, we can establish a combination of heating, sanitary hot water, solar panels and fan-coil air conditioning.

For this reason it can be said that a house with aerothermy is a modern house that thinks in comfort and energy efficiency.

Domestic & Local

The heating in these cases contains some alternatives when choosing the desired option. We can pick between the following varieties and components knowing the kind of heat that we want to reach:

Radiators

The emitters or radiators are the most common installation that can be found in homes or premises, which are spread throughout the areas to be heated.

Blue Heat

Called modern radiators, they are a product whose main objective is achieve a great performance with an optimization of the electric consumption through the use of oil.

Radiating floor

It has always been said that the feet are the thermometer of the body. Through this product, you can transmit the state of comfort of the feet to the rest of the body while you are walking through your home

Boilers

It’s the most common heat generator. Depending on the energy efficiency or the type of material consumed we can choose these different types:

Diesel Boiler

The diesel or gas-oil C boilers have, as their main characteristic, the use of this fuel to generate the energy necessary for heating. These devices have a tank in which the gas-oil is stored for heating.

Gas Boiler

The natural gas, when it’s burned, heats and turns the water into vapor, leaving the tank with the mission of heating our homes.

Biomass Boiler

These boilers use as a source of energy natural fuels like wooden pallets, olive bones, forest residues, nutshells, etc. to generate heat.

ACS Accumulator

For any heating installation it’s necessary to place one of this devices in order to always have a storage of hot water, powered by a heat generator (boiler, solar panel, stove, etc.).

Industrial

Any public centers of large dimensions, such as hospitals and hotels, usually have many services with centralized heating systems of great powers, such as:

Diesel Boiler

The diesel or gas-oil C boilers have, as their main characteristic, the use of this fuel to generate the energy necessary for heating. These devices have a tank in which the gas-oil is stored for heating.

Gas Boiler

The natural gas, when it’s burned, heats and turns the water into vapor, leaving the tank with the mission of heating large surfaces.

Biomass Boiler

These boilers use as a source of energy natural fuels like wooden pallets, olive bones, forest residues, nutshells, etc. to generate heat.

 

ACS Accumulator

When we talk about central heating for large areas, we need to use one or more ACS accumulators with the capacity to store large amounts of water.

These are the main brands that we use on our projects

These are the main brands that we use on our projects

Llámanos